5V0-62.22 VMware Workspace ONE 21.X UEM Troubleshooting Specialist Questions and Answers

The VMware Workspace ONE Assist Agent mode that will meet this requirement is Attended Mode. Attended Mode is a mode that requires user consent and presence for remote sessions. The user can see and control the remote session, and can also pause or end it at any time for enhanced privacy2. Attended Mode also allows the user to approve or deny many of the remote actions, such as file transfer, command execution, or device information access2.

The root cause of this issue is that Workspace ONE Assist agent failed to connect to the Workspace ONE Assist server. The request timeout error indicates that the Workspace ONE Assist agent did not receive a response from the Workspace ONE Assist server within the specified time limit3. This could be due to network issues, firewall settings, or authentication problems. The administrator should check and resolve these issues to enable remote sessions using Workspace ONE Assist.

 The logging level that the administrator should use is verbose. Verbose logging provides the most detailed information about the ACC (AirWatch Cloud Connector) service, such as configuration, connectivity, synchronization, and errors2. Verbose logging can help identify and troubleshoot the root cause of the issue with the CloudConnector.log.

The statement that describes the root cause of this issue is that the protocol https:// is missing in the Secure Email Gateway hostname value. The Secure Email Gateway hostname value is the URL that Workspace ONE UEM uses to connect to the Secure Email Gateway edge service on UAG and perform email management tasks, such as quarantine, wipe, or block. The protocol https:// is required to indicate that the connection is secure and encrypted. If the protocol https:// is missing, Workspace ONE UEM will not be able to connect to the Secure Email Gateway edge service, and the test connection will fail. The administrator should add the protocol https:// to the Secure Email Gateway hostname value.

 The form of logging that should be used to accomplish this goal is device-based targeted logging. Device-based targeted logging allows the administrator to enable debug logging for multiple devices at once, based on various criteria, such as platform, model, ownership, and so on1. Device-based targeted logging can help collect more detailed information about device events, actions, and errors for troubleshooting purposes.

 The component that the administrator should enable verbose logging on is UAG (Unified Access Gateway) Edge service. UAG is a component that provides secure edge services for Workspace ONE UEM, such as VMware Tunnel, Content Gateway, or Secure Email Gateway2. If users are receiving a timeout error when accessing files using the Workspace ONE Content application, it could indicate that there is a problem with UAG configuration, connectivity, or performance. Enabling verbose logging for UAG can help identify and troubleshoot the issue.

The misconfiguration that would be causing this behavior is AWCM Persistence is not correctly configured. AWCM Persistence is a setting that ensures that devices maintain a consistent connection with the same AWCM server in a load-balanced environment. If AWCM Persistence is not correctly configured, devices may be bounced between different AWCM servers and cause enrollment failures or communication errors. The administrator should check and configure AWCM Persistence properly.

The VMware Workspace ONE UEM service or component logs that should be gathered by the administrator to determine a root cause are Device Services logs. Device Services is a component of Workspace ONE UEM that handles device enrollment, management, and communication. Device Services also hosts the AWCM service, which is responsible for delivering push notifications to devices. If iOS devices are unable to enroll using basic users, it could indicate that there is a problem with Device Services configuration, connectivity, or synchronization. The administrator should gather and analyze the Device Services logs to identify and troubleshoot the issue.

An organization administrator changed the assignment of the application to the customer OG (organization group). The assignment of an application determines which devices can see and install the application from the Workspace ONE Catalog. If an organization administrator changed the assignment of an application from a lower OG (such as customer) to a higher OG (such as global), it may affect the visibility and availability of the application for some devices in lower OGs. The administrator should check and restore the assignment of the application to the customer OG if needed.

The service that the organization administrator has direct control over to enable verbose logging to troubleshoot this issue is ACC (AirWatch Cloud Connector) service. ACC is a service that integrates Workspace ONE UEM with internal enterprise systems, such as Active Directory or Certificate Authority. ACC enables Workspace ONE UEM to use internal resources without exposing them to the Internet. If some users are unable to enroll their devices using their Active Directory accounts, it could indicate that there is a problem with ACC configuration, connectivity, or synchronization. Enabling verbose logging for ACC can help identify and troubleshoot the root cause of the issue.

The organization’s Apple Push Notification certificate expired. The Apple Push Notification certificate is a certificate that allows Workspace ONE UEM to communicate with iOS devices using push notifications. Push notifications are required for iOS devices to check in and receive email configuration profiles from Workspace ONE UEM. If the Apple Push Notification certificate expires or becomes invalid, iOS devices will not be able to check in or receive email configuration profiles, and their email inbox will fail to load. The administrator should check and renew the Apple Push Notification certificate if needed.

The most likely cause of this issue is that the VPN payload in the Android device profile is configured incorrectly in UEM. The VPN payload defines how devices connect to the VMware Tunnel edge service and access internal resources. If the VPN payload is incorrect, the devices will not be able to establish a VPN connection with the VMware Tunnel edge service and access server resources on the organization’s internal network. The administrator should review and correct the VPN payload settings in UEM.

The root cause of this problem is that this organization group is not a Customer type OG. The Hub Services settings page is only available for Customer type OGs, which are the top-level OGs in the hierarchy1. The Hub Services settings page allows the administrator to configure various features and services for the Intelligent Hub app, such as notifications, people, home, and catalog1. The administrator should navigate to the Customer type OG to access the Hub Services settings page.

The two log files that would be used to troubleshoot issues related to this Directory synchronizations are DirectorySyncServiceLogFile.log and CloudConnector.log. DirectorySyncServiceLogFile.log is a log file that records the directory synchronization process between Workspace ONE UEM and Active Directory or LDAP. CloudConnector.log is a log file that records the communication and synchronization between Workspace ONE UEM and ACC (AirWatch Cloud Connector), which is a service that integrates Workspace ONE UEM with internal enterprise systems, such as Active Directory or Certificate Authority. These log files can help identify and troubleshoot any errors or issues related to directory synchronization.

The strategy that accurately describes the solution for this problem is running the keytool import targeting the new certificate. The AWCM keystore is a Java keystore file that contains the SSL certificates used by AWCM to establish secure connections with devices and other components. If the SSL certificates are rotated on IIS and the load balancer, but not on the AWCM keystore, then AWCM will not be able to communicate with devices using push notifications. To resolve this issue, the administrator must import the new SSL certificates into the AWCM keystore using the keytool command2.