Huawei H35-480_V3.0 Dumps Questions Answers

A. Mixed slot is a slot configuration in which at least one downlink/uplink symbol is present, while other symbols can be flexibly configured for downlink or uplink transmission. This allows for a more efficient use of resources and better support for different types of services. B. Flexible-slot is a slot configuration in which all symbols are flexibly configured for downlink or uplink transmission. This allows for a more efficient use of resources and better support for different types of services. C. Downlink-only slot is a slot configuration in which all symbols are dedicated for downlink transmission, This configuration is mainly used for downlink-centric services such as video streaming or software downloads. D. Uplink-only slot is a slot configuration in which all symbols are dedicated for uplink transmission, this configuration is mainly used for uplink-centric services such as voice calls or video conferencing.

The X2 interface is a signaling interface used in LTE networks to interconnect two eNodeBs (LTE base stations) to support handover and other functions. In the inter-site DC solution, the X2 interface can also be used to implement the transmission interconnection between the LTE and NR sites.

In order to ensure smooth handover and service continuity between the LTE and NR sites, it is necessary to meet the requirement of low transmission delay, which is typically <20ms. This low delay requirement is important to ensure that the handover can be completed quickly and without interruption to the ongoing service.

The imbalance between uplink and downlink coverage in C-band is not fixed, it varies depending on the network configuration, location, and other factors. Generally speaking, it's hard to provide an exact number for this imbalance, as it depends on the specific network conditions and the equipment used.

However, a common practice is to use more power in downlink than uplink, this is due to the fact that downlink is more sensitive to path loss than uplink, and also because the downlink signal is intended to cover a larger area than the uplink. Therefore, the imbalance is commonly in the range of 3 to 6 dB, and it's more likely to be at the lower end of that range. So, the correct answer is B. 3dB It's worth noting that the C-band is not the most popular frequency band for 5G network deployment, it's just one of the many frequency bands that are being used for 5G deployment, and the most popular frequency bands for 5G deployment vary depending on the country, region, and operator.