Paloalto Networks PSE-Strata-Pro-24 Dumps Questions Answers

The problem provides several constraints and design requirements that must be carefully considered:

Bandwidth Requirement:

The customer needs an NGFW capable of handling a total throughput of 72 Gbps.

The PA-5445 is specifically designed for high-throughput environments and supports up to81.3 Gbps Threat Prevention throughput(as per the latest hardware performance specifications). This ensures the throughput needs are fully met with some room for growth.

Interface Compatibility:

The customer mentions that their core switches support up to40 Gbps interfaces. The design must include aggregate links to meet the overall bandwidth while aligning with the 40 Gbps interface limitations.

The PA-5445 supports40Gbps QSFP+ interfaces, making it a suitable option for the hardware requirement.

No Change to IP Address Structure:

Since the customer cannot modify their IP address structure, deploying the NGFW inLayer-2 or Virtual Wire modeis ideal.

Virtual Wire modeallows the firewall to inspect traffic transparently between two Layer-2 devices without modifying the existing IP structure. Similarly, Layer-2 mode allows the firewall to behave like a switch at Layer-2 while still applying security policies.

Threat Prevention, DNS, and Sandboxing Requirements:

The customer requires advanced security features likeThreat Preventionand potentiallysandboxing(WildFire). The PA-5445 is equipped to handle these functionalities with its dedicated hardware-based architecture for content inspection and processing.

Aggregate Interface Groups:

The architecture should includeaggregate interface groupsto distribute traffic across multiple physical interfaces to support the high throughput requirement.

By aggregating2 x 40Gbps interfaces on both sides of the pathin Virtual Wire or Layer-2 mode, the design ensures sufficient bandwidth (up to 80 Gbps per side).

Why PA-5445 in Layer-2 or Virtual Wire mode is the Best Option:

Option Asatisfies all the customer’s requirements:

The PA-5445 meets the 72 Gbps throughput requirement.

2 x 40 Gbps interfaces can be aggregated to handle traffic flow between the core switches and the NGFW.

Virtual Wire or Layer-2 mode preserves the IP address structure, while still allowing full threat prevention and DNS inspection capabilities.

The PA-5445 also supports sandboxing (WildFire) for advanced file-based threat detection.

Why Not Other Options:

Option B:

The PA-5430 is insufficient for the throughput requirement (72 Gbps). Itsmaximum Threat Prevention throughput is 60.3 Gbps, which does not provide the necessary capacity.

Option C:

While the PA-5445 is appropriate, deploying it inLayer-3 modewould require changes to the IP address structure, which the customer explicitly stated is not an option.

Option D:

The PA-5430 does not meet the throughput requirement. Although Layer-2 or Virtual Wire mode preserves the IP structure, the throughput capacity of the PA-5430 is a limiting factor.

References from Palo Alto Networks Documentation:

Palo Alto Networks PA-5400 Series Datasheet (latest version)

Specifies the performance capabilities of the PA-5445 and PA-5430 models.

Palo Alto Networks Virtual Wire Deployment Guide

Explains how Virtual Wire mode can be used to transparently inspect traffic without changing the existing IP structure.

Aggregated Ethernet Interface Documentation

Details the configuration and use of aggregate interface groups for high throughput.

After a customer has concluded an evaluation of Palo Alto Networks solutions, it is critical to provide a detailed analysis of the results and benefits gained during the evaluation. The following two tools are most appropriate:

Why "Best Practice Assessment (BPA)" (Correct Answer A)?The BPA evaluates the customer's firewall configuration against Palo Alto Networks' recommended best practices. It highlights areas where the configuration could be improved to strengthen security posture. This is an excellent tool to showcase how adopting Palo Alto Networks' best practices aligns with industry standards and improves security performance.

Why "Security Lifecycle Review (SLR)" (Correct Answer B)?The SLR provides insights into the customer's security environment based on data collected during the evaluation. It identifies vulnerabilities, risks, and malicious activities observed in the network and demonstrates how Palo Alto Networks' solutions can address these issues. SLR reports use clear visuals and metrics, making it easier to showcase the benefits of the evaluation.

Why not "Firewall Sizing Guide" (Option C)?The Firewall Sizing Guide is a pre-sales tool used to recommend the appropriate firewall model based on the customer's network size, performance requirements, and other criteria. It is not relevant for showcasing the benefits of an evaluation.

Why not "Golden Images" (Option D)?Golden Images refer to pre-configured templates for deploying firewalls in specific use cases. While useful for operational efficiency, they are not tools for demonstrating the outcomes or benefits of a customer evaluation.

When high traffic from Palo Alto Networks NGFWs to Active Directory servers causes performance issues, optimizing the way NGFWs gather user-to-IP mappings is critical. Palo Alto Networks offers multiple ways to collect user identity information, andCloud Identity Engineprovides a solution that reduces the load on AD servers while still ensuring efficient and accurate mapping.

Option A (Correct):Cloud Identity Engineallows NGFWs to gather user-to-IP mappings directly from Active Directory authentication logs or other identity sources without placing heavy traffic on the AD servers. By leveraging this feature, the NGFW can offload authentication-related tasks and efficiently identify users without overloading AD servers. This solution is scalable and minimizes the overhead typically caused by frequent User-ID queries to AD servers.

Option B:UsingGlobalProtect Windows SSOto gather user information can add complexity and is not the most efficient solution for this problem. It requires all users to install GlobalProtect agents, which may not be feasible in all environments and can introduce operational challenges.

Option C:Data redistributioninvolves redistributing user-to-IP mappings from one NGFW (hub) to other NGFWs (spokes). While this can reduce the number of queries sent to AD servers, it assumes the mappings are already being collected from AD servers by the hub, which means the performance issue on the AD servers would persist.

Option D:UsingGlobalProtect agentsto gather user information is a valid method for environments where GlobalProtect is already deployed, but it is not the most efficient or straightforward solution for the given problem. It also introduces dependencies on agent deployment, configuration, and management.

How to Implement Cloud Identity Engine for User-ID Mapping:

EnableCloud Identity Enginefrom the Palo Alto Networks console.

Integrate the Cloud Identity Engine with the AD servers to allow it to retrieve authentication logs directly.

Configure the NGFWs to use the Cloud Identity Engine for User-ID mappings instead of querying the AD servers directly.

Monitor performance to ensure the AD servers are no longer overloaded, and mappings are being retrieved efficiently.

References:

Cloud Identity Engine Overview: https://docs.paloaltonetworks.com/cloud-identity

User-ID Best Practices: https://docs.paloaltonetworks.com