DES-4122 Specialist - Implementation Engineer PowerEdge Version 2.0 Questions and Answers

Questions 4

A technician working with a Dell EMC PowerEdge 1 take corrective action?

Options:

Check the System Event Log

Check PSU LED

Reseat the PSU

Check the System Event Log

Check PSU LED

Do a virtual reseat of the iDRAC

Check the LCC Log

Check PSU LED

Reseat the CPU

Check the LCC Log

Check PSU LED

Reseat the PSU

Buy Now

Questions 5

What is the minimum number of components, beside the system board, required to POST?

Options:

PSUs, CPUs, and DIMMs as configured in BIOS

1 PSU, 1 DIMM, and 1 CPU only

1 PSU and 1 CPU only

1 PSU, 1 CPU, 1 DIMM, and PERC SAS controller

Buy Now

Questions 6

What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?

Options:

All GPU cards must be installed at the same time

All GPU cards must be of the same type but can be a different model

All GPU cards must be of the same type and model

All GPU cards must be installed on the same riser card.

Buy Now

Questions 7

A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:

* 2x CPUs

* 384 GB RAM

* 6x 1 TB drives

* 1x PSU

The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed

How can the technician upgrade the license?

Options:

The license cannot be upgraded on a single PSU system

Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server

The license cannot be upgraded because the user will not allow the server to be powered on

Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down

Buy Now

Questions 8

What happened on April 30, 2019?

Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

Options:

Option A

Option B

Option C

Option D

Buy Now

Questions 9

A system engineer has a 14G Dell EMC Poweredge server with an amber light blinking. The engineer must pull a SupportAssist collection before calling Dell Support to evaluate what the potential problem. Use the simulator to collect and view the SupportAssist collection.