Black Friday Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: clap70

HPE6-A72 Aruba Certified Switching Associate Exam Questions and Answers

Questions 4

Match the terms to the correct layer of the OSI model.

Options:

Buy Now
Questions 5

What are two features of the three-tier designs? (Choose two.)

Options:

A.

removes the distribution layer in favor of a spine-leaf design used in modern data center deployments

B.

adds a distribution layer to free up resources from the Core for improved performance and routing throughput

C.

a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments

D.

uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer

E.

is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided

Buy Now
Questions 6

Refer to the exhibit.

The Aruba 8400 in the exhibit is member 2 of a VSX stack.

Which command will enter the interface sub configuration mode for the port, indicated by the orange square?

Options:

A.

8400(config)# interface 2/4/15

B.

8400(config)# interface 1/7/16

C.

8400(config)# interface 1/4/15

D.

8400(config)# interface 2/3/17

Buy Now
Questions 7

What is the Link Layer Discovery Protocol?

Options:

A.

a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system

B.

a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4

C.

a standardized protocol for communicating directly-connected device information and capabilities.

D.

an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP

Buy Now
Questions 8

Which switch supports a maximum of 8 line-cards, 3 fabric modules, and 2 management cards?

Options:

A.

HPE Aruba Networking CX 5412r

B.

HPE Aruba Networking CX 8408

C.

HPE Aruba Networking CX 8400

D.

HPE Aruba Networking CX 6410

Buy Now
Questions 9

Refer to the exhibit.

What VSF command produces the above output?

Options:

A.

show vsf member

B.

show vsf link

C.

show vsf topology

D.

show vsf detail

Buy Now
Questions 10

Match the term to the correct description.

Options:

Buy Now
Questions 11

Which two port characteristics must match between LAG interfaces? (Choose two.)

Options:

A.

Port number

B.

Duplex

C.

Member ID

D.

Media type

E.

Chassis number

Buy Now
Questions 12

With what other technology does Half Duplex communication closely match?

Options:

A.

a pair of fiber optic strands allowing transmit on one and receive on the other at the same time

B.

a mobile phone call

C.

point-to-point connections between two switches allowing concurrent transmit and receive

D.

CB radio using push-to-talk

Buy Now
Questions 13

What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)

Options:

A.

SNMPv2c

B.

HTTPS

C.

USB-C console

D.

Telnet

E.

SSH

Buy Now
Questions 14

Interface 1/1/1 is up

Admin state is up

Link transitions: 1

Description: TO_PC-1

Hardware: Ethernet, MAC Address: 00:11:22:33:44:55

MTU 1500

Type 1GbT

Full-duplex

qos trust none

Speed 1000 Mb/s

Auto-negotiation is on

Flow-control: off

Error-control: off

MDI mode: MDIX

VLAN Mode: access

Access VLAN: 1111

Which command will produce the above output?

Options:

A.

show interface vlan 1111

B.

show interface 1/1/1

C.

show interface gigabit 1/1/1

D.

show vlan 1111

Buy Now
Questions 15

Which two options are the Layer 2 protocols? (Choose two.)

Options:

A.

802.1Q

B.

IPSec

C.

STP

D.

RIP

E.

802.11af

Buy Now
Questions 16

Which statement is correct regarding powering an Aruba Access Point?

Options:

A.

PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.

B.

Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC

power adapter to draw power.

C.

PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

D.

Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.

Buy Now
Questions 17

Review the exhibit.

Which ports should be configured as access ports? Click in the green box to make your selection. (Select two.)

Options:

Buy Now
Questions 18

Currently, the prompt on the AOS-CX switch displays:

Core-1(config)# interface 1/1/1

_Core-1 (config-if)#_

What command will immediately return the prompt to privileged mode?

Options:

A.

The command end

B.

pressing ctrl+w

C.

The command quit

D.

The command exit

Buy Now
Questions 19

Which field in the IPv4 header indicates whether the IP packet carries TCP or UDP traffic?

Options:

A.

Protocol

B.

IHL

C.

TTL

D.

Identification

Buy Now
Questions 20

Which switches support Aruba Virtual Switching Extension (VSX)? (Choose two.)

Options:

A.

Aruba 6405

B.

Aruba 2930F

C.

Aruba 8400

D.

Aruba 5406R

E.

Aruba 8350

Buy Now
Questions 21

Refer to the exhibit.

The command show LLDP neighbor-info gets typed into Access-1. All switches are Aruba OS-CX switches. What is the output of this command?

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Buy Now
Questions 22

Click on the colored box that corresponds with the line that best represents Multicast traffic flow.

Options:

Buy Now
Questions 23

Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?

Options:

A.

10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet

B.

Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet

C.

10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet

D.

10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet

Buy Now
Questions 24

What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?

Options:

A.

Loginadminand password admin.

B.

Loginadminand password field empty.

C.

Loginadminand password forgetme!

D.

Login admin and password password.

Buy Now
Questions 25

Refer to the exhibit.

What is the correct binary conversion of the last two hexadecimal characters of the physical address?

Options:

A.

1101 1000

B.

1110 1101

C.

1001 1111 0101 0011

D.

1000 1101 1110 1101

Buy Now
Questions 26

What is the correct description of a Multi-Layer Switch?

Options:

A.

a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence

B.

any switch that supports PoE, LLDP-MED and Flow Control

C.

has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router

D.

multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

Buy Now
Questions 27

Core(config)# user admin password

Core(config)# interface mgmt

Core(config-if-mgmt)# ip static 10.254.16.89/22

Core(config-if-mgmt)# default-gateway 10.254.19.129

Core(config)# ssh server vrf mgmt

Core(config)# https-server vrf mgmt

You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.

Which two steps are missing? (Choose two.)

Options:

A.

Core(config)# https-server rest access-mode read-write

B.

Core(config-if-mgmt)# no shutdown

C.

Core(config-if-mgmt)# no tftp-server

D.

Core(config-if-mgmt)# enable

E.

Core(config)# https-server rest access-mode read-only

Buy Now
Questions 28

Which network category applies to a SOHO internal network?

Options:

A.

SD-WAN

B.

LAN

C.

WAN

D.

Internet

Buy Now
Questions 29

Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?

Options:

A.

switch(config-if)# no lldp interface (port) transmit

B.

switch(config-if)# no lldp transmit

C.

switch(config-if)# no lldp receive

D.

switch(config)# no lldp

Buy Now
Questions 30

What is true about VSX? (Choose two.)

Options:

A.

VSX is ideal for Campus access layer deployments where ease of deployment is needed.

B.

VSX allows upgrading members with near zero downtime or loss of packets.

C.

VSX is available on all Aruba OS-CX switches except the 6300F model.

D.

VSX is implemented on static port switches. VSX-plus needed to stack chassis together.

E.

VSX run separate control planes to reduce latency and improve performance.

Buy Now
Questions 31

What are two key features unique to AOS-CX that support root cause analytics and recovery in a wired network? (Select two.)

Options:

A.

REST APIs

B.

Network Analytics Engine

C.

Multi-Protocol Border Gateway Protocol (MP-BGP)

D.

Redundant management modules

E.

Checkpoints

Buy Now
Exam Code: HPE6-A72
Exam Name: Aruba Certified Switching Associate Exam
Last Update: Nov 23, 2024
Questions: 105
HPE6-A72 pdf

HPE6-A72 PDF

$25.5  $84.99
 Add to Cart
HPE6-A72 Engine

HPE6-A72 Testing Engine

$30  $99.99
 Add to Cart
HPE6-A72 PDF + Engine

HPE6-A72 PDF + Testing Engine

$40.5  $134.99
 Add to Cart