Black Friday Special 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: clap70

NS0-527 NetApp Certified Implementation Engineer - Data Protection Questions and Answers

Questions 4

Your customer is concerned that his volume might run out of space. Which two volume command options would be used to resolve this problem?

(Choose two.)

Options:

A.

snapshot autodelete

B.

autosize

C.

space-guarantee

D.

filesystem-size-fixed

Buy Now
Questions 5

You are planning to deploy MetroCluster IP. As part of the implementation strategy, you are asked to verify that youhave the relevant hardware for the deployment.

Which two elements are required to deploy your solution? (Choose two.)

Options:

A.

storage controllers

B.

FC network switches

C.

cluster peering network

D.

iSCSI Ethernet switches

Buy Now
Questions 6

A customer has a MetroCluster solution and wants to automate the disaster-recovery process. The customer wants to control the switchcover between the sites.

Which NetApp tool would satisfy these requirements?

Options:

A.

OnCommand Unified Manager

B.

MetroCluster Tiebreaker

C.

OnCommand System Manager

D.

OnCommand SnapCenter

Buy Now
Questions 7

You must manually upgrade your company’s 8-node cluster from ONTAP 9.5 to ONTAP 9.7. Due to the sensitivity of the data that is being stored on the cluster, it is company policy to perform these upgrades one node at a time.

What are two steps that you must perform to accomplish this task? (Choose two.)

Options:

A.

Terminate active NFS connections.

B.

Move Epsilon to maintain cluster quorum.

C.

Terminate active SMB connections.

D.

Change disk ownership.

Buy Now
Questions 8

Click the Exhibit button.

You are configuring cluster peering from cluster2 to cluster1 on your ONTAP 9.7 clusters using ONTAP System Manager. You are given the details shown below to set up the cluster peer relationship. You want to determine why the peering has failed.

Cluster2 intercluster LIFIP: 192.168.0.143 Subnet: 255.255.255.0 Port: e0e passphrase: netapp1234

Cluster1 intercluster LIF IP: 192.168.0.153 Subnet: 255.255.255.0 Port: e0e passphrase: netapp1234

Referring to the exhibit, which statement is correct?

Options:

A.

The Source Cluster IP is incorrect.

B.

The Target Cluster Passphrase is incorrect.

C.

The Target Cluster IP is incorrect.

D.

The Source Cluster Passphrase is incorrect.

Buy Now
Questions 9

What are three methods of configuring SnapMirror replication relationships? (Choose three.)

Options:

A.

Use Active IQ.

B.

Use the ONTAP command line.

C.

Use OnCommand Insight.

D.

Use ONTAP System Manager.

E.

Use Active IQ Unified Manager.

Buy Now
Questions 10

Click the Exhibit button.

A client has a SnapMirror relationship between two sites that is scheduled to run once a day at 12:15 a.m. They have a network connection between two sites thatprovides 100 Mbps on bandwidth. By performing the backup at this time, they can maximize their bandwidth use.

Referring to the exhibit, how long does the SnapMirror update take to finish?

Options:

A.

one hour

B.

four hours

C.

three hours

D.

two hours

Buy Now
Questions 11

A FAS2750 cluster administrator experiences network issues during replication updates that pass over a low- bandwidth WAN link to their DR site. They also replicate locally to another cluster for testing and development. The administrator wants to enable network compression only on the existing WAN Link SnapMirror jobs.

In this scenario, which statement is correct?

Options:

A.

Network compression must be enabled when initializing the replica, the current jobs need to be deleted and new ones created.

B.

Network compression is a global option and it cannot be used.

C.

The current DR transfers must be aborted and the option enabled on each job, then resume the transfer.

D.

Network compression ispossible but not on a FAS2750.

Buy Now
Questions 12

A customer is planning the cloud strategy for their Microsoft SQLdatabases and must be able to protect them from outages. They are planning on using multiple cloud providers for their solution with their current NetApp storage system.

In this scenario, which two products are required to satisfy their backup managementneeds? (Choose two.)

Options:

A.

Cloud Volumes ONTAP

B.

SnapCenter

C.

CloudSync

D.

FlashPool

Buy Now
Questions 13

You are working for a customer that has deployed a large FlexGroup with ONTAP 9.5. This FlexGroup has a SnapMirror relationship to a system at a disaster recovery site. The FlexGroup is nearly full and needs to be expanded to accommodate additional data.

In this scenario, what must you do to expand the FlexGroup and ensure that the data remains protected?

Options:

A.

Break the SnapMirror relationship, expand the source FlexGroup, and update the SnapMirror.

B.

Offline the source FlexGroup, add additional volumes, bring it online, and update the SnapMirror.

C.

Expand the source FlexGroup nondisruptively, and update the SnapMirror.

D.

Break the SnapMirror relationship, expand the source FlexGroup, and re-baseline the SnapMirror.

Buy Now
Questions 14

An ONTAP administrator is trying to configure a three-way-disaster recovery solution. Cluster 2 is within 50 km of Cluster 1, the primarycluster, with an RTT of 7 ms. Cluster 3 is over 300 km from Cluster 1 with an RTT of 29 ms.

In this scenario, what are two topologies that would accomplish this task? (Choose two.)

Options:

A.

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror asynchronous from Cluster 2 to Cluster 3

B.

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror Synchronous to Cluster 3

C.

a fan out topology with SnapMirror Synchronous from Cluster 1 to Cluster 2 and SnapMirror asynchronous from Cluster 1 to Cluster 3

D.

a cascade topology from Cluster 1 to Cluster 2 with SnapMirror Synchronous, and then SnapMirror Synchronous from Cluster 2 to Cluster 3

Buy Now
Questions 15

A customer has application data corruption on a LUN that is in a volumewith six other data LUNs. The customer needs to restore the corrupted LUN from a Snapshot copy without affecting the other six LUNs.

Which process would accomplish this task?

Options:

A.

Use volume SnapRestore.

B.

Use LUN mapping.

C.

Use the volume Snapshot partial-restore file.

D.

Use a single-file restore.

Buy Now
Questions 16

A customer is running ONTAP 9.7 on a FAS2720 cluster that has 12 x 4 TB NL-SAS drives in the chassis with capacity running low. You decide to use Fabric Pool technology to solve this problem.

What does the customer need to do to accomplish this task?

Options:

A.

Add an SSD aggregate.

B.

Purchase a Data Protection Optimized (DPO) license.

C.

Use the CLI and add a capacity pool.

D.

Use the wizard and add a capacity pool.

Buy Now
Questions 17

You are asked to protect your user's HomeDir volume by keeping one weekly Snapshot copy for 52 weeks, one monthly Snapshot copy for six months, and one daily Snapshot copy for 90 days.

Which two statements describe how to accomplish this task? (Choose two.)

Options:

A.

Create a single job schedule for weekly, monthly, and daily.

B.

Create individual job schedules for weekly, monthly, and daily.

C.

Create a policy to include the new job schedules.

D.

Create a separate policy for weekly, monthly, and daily.

Buy Now
Questions 18

Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choosetwo.)

Options:

A.

The source volume is available for I/O.

B.

A manual re-synchronization is not needed.

C.

The source volume is unavailable for I/O

D.

A manual re-synchronization is needed.

Buy Now
Questions 19

A customer wants a new solution that reaches a near-zero recovery time objective (RTO) and a zero recovery point objective (RPO).

In thisscenario, which NetApp solution satisfies the requirements?

Options:

A.

NDMP

B.

MetroCluster

C.

SnapMirror

D.

SnapVault

Buy Now
Questions 20

For DR purposes, data must be replicated between on-premises clusters and multiple public clouds. In this scenario, which solution would simplify management?

Options:

A.

Cloud Volumes ONTAP

B.

Cloud Manager

C.

Cloud Sync

D.

Cloud Insights

Buy Now
Questions 21

You want to configure peering between two existing ONTAP HA clusters.

In this scenario, which three steps would you perform to accomplish this task? (Choose three.)

Options:

A.

Create a cluster peering relationship.

B.

Create intracluster LIFs.

C.

Create intercluster LIFs.

D.

Create a SVM peeringrelationship.

E.

Create iSCSI LIFs.

Buy Now
Questions 22

You are asked to implement a NetApp solution that has high availability with transparent failover between two data centers.

Which two solutions satisfy this requirement? (Choose two.)

Options:

A.

ONTAP Select

B.

SnapVault

C.

SnapMirror Sync

D.

MetroCluster

Buy Now
Questions 23

Click the Exhibit button.

A customer needs to add an additional X91143A card into a FAS9000 to allow mirroring between theproduction system and the disaster recovery FAS9000 platform. Slots 1, 4, 6, 8, and 9 have cards in them.

Referring to the exhibit, in which slot should you install the card?

Options:

A.

5

B.

10

C.

3

D.

7

Buy Now
Exam Code: NS0-527
Exam Name: NetApp Certified Implementation Engineer - Data Protection
Last Update: Nov 23, 2024
Questions: 156
NS0-527 pdf

NS0-527 PDF

$25.5  $84.99
NS0-527 Engine

NS0-527 Testing Engine

$30  $99.99
NS0-527 PDF + Engine

NS0-527 PDF + Testing Engine

$40.5  $134.99